HJC黄金城

EPC Products Civil Engineering Testing Instruments Geotechnical Testing Quality Assurance Concrete Testing High Stiffness Flexural Frame, 200 kN Cap., SIMPLEX
产品中心
High Stiffness Flexural Frame, 200 kN Cap., SIMPLEX

Model：50-C1511/FR.

Use：This high stiffness flexural frame has been especially designed for displacement controlled testing on advanced construction materials, e.g. fiber reinforced concrete (FRC) and sprayed concrete.

Standard：EN 14488-5 ,EN 14651 ,EN 12390-5 ,ASTM C293, ASTM C78, EN 1339 ,EN 1340, ASTM C1609

Description

This high stiffness flexural frame has been especially designed for displacement controlled testing on advanced construction materials, e.g. fiber reinforced concrete (FRC) and sprayed concrete.
These tests are significantly affected by the actual frame stiffness therefore the relevant international Standards state stiffness limits which are exceeded by this new model (better than 200 kN/mm).
This remarkable result comes from the frame sections but it is also derived from the particular layout which keeps the specimen aligned with the frame crossbeams maximizing structural rigidity.
 
The new layout also allows easier frontal specimen loading and positioning.

The horizontal daylight accommodates large specimens (slab, flagstones), concrete beams and kerbs long up to 650 mm.

Two models are available, either with pressure transducer or with load cell, both fitted with piston travel limit switch and connection kit to separate control console.
 
Frames are available with either pressure transducer or load cell (recommended for FRC testing) and are fitted with piston travel limit switch and connection kit to the control console. Bearers not included. See accessories.

Project Case
Solution
Download
相关标签
concrete testing, Controls
HJC黄金城




    HJC黄金城