HJC黄金城

EPC Products Teaching and Research Laboratory Equipment Educational Food Technology FT28Oil Extraction Screw Press
产品中心
FT28Oil Extraction Screw Press

Model：

Use：It is designed to press seeds, nuts or other fine biomass to extract the oil.

Standard：

Related Products

Description


Seed or ground meal is gravity-fed to the press from an integral feed hopper fitted with a manually operated shut-off slide.

The thickness of the press cake may be varied. The press is driven at the discharge end through a single-reduction helical gearbox.

The power source is a 4kW, four-pole, three-phase electric motor. Typical throughput data for various seeds is shown in the table below.

Technical details

screw press ,having barrel constructed from separate cast rings spaced apart by shims. 60mm diameter bore, 155mm drainage length with single-piece wormshaft driven at the discharge end through a single- reduction helical gearbox.Complete with feed hopper, manual feed chute, oil discharge chute and suitable base plate. Includes: one 4kW, four-pole motor, 1,450rpm with starter.

 

FIRST PRESS

SECOND PRESS

Seed

Pre-treament

Through put Kg/hr

% Oil in cake

Through put (1st press cake) Kg/hr

% Oil in cake

Sunflower

Clean

35/40

15/28

40

12

Rape

Clean

35/40

17/20

40

13

Linseed

Clean

28

20

40

12

Copra

Clean and break to 10/12mm pieces

40

30

40

12

Palm kernels

Clean and grind to 8 mesh

35/40

20

35

12

Macadamia kernels

Clean

30 (60%

kenels/ 40%cake)

20/24

30

14/16


Overall dimensions

Length

1.20m

Width

0.99m

Height

1.09m

Packed and crated shipping specifications

Volume

1.10m3

FT28

320kg

 




Project Case
Solution
Download
相关标签
Armfield,FT28,Oil Extraction Screw Press
HJC黄金城




    HJC黄金城