HJC黄金城

Description

The metal churn paddle is electrically driven. A multi-speed electric motor is mounted on the side of the vessel, which drives the
paddle agitator.
The paddle may be removed for cleaning. A batch of up to 5 litres of cream can allow production of more than 1kg of butter, and all
of the important stages of this ‘colloid inversion’ process can be、 adequately observed.

Butter making accessories - FT21A
The accessories have been selected to enable a fnished product to be produced in conjunction with the butter churn.
The cream setting pan and dairy thermometer in combination will produce cream from 4 litres of milk. Depending on the fat content of
the milk, approximately 0.5 litres of cream can be obtained from this and the minimum churn charge of 1 litre can be quickly separated.
This can be used if no automatic cream separator such as FT15 (Disc Bowl Centrifuge) is available. Approximately 0.5kg of butter
can be made from 1.5 litres of cream in the churn. During the churning process it is necessary to drain off the buttermilk and washing water,
a sieve is provided to strain out any butter particles to be returned to the churn. Scotch Hands are required to ‘work’ the butter into a solid
mass after churning. Water exuded during the working process is removed by the use of muslin cloth.
In order to carry out these processes, the following accessories are supplied:

• 1 x 4 litre capacity cream setting pan
  
• 1 x dairy thermometer
  
• 1 x nylon sieve
  
• 1 x pair of Scotch Hands
  
• 1 x roll butter muslin