• HJC黄金城

    EPC Products Civil Engineering Testing Instruments Geotechnical Testing Rock & Soil Testing Laboratory Soil Testing Soil Mechanical Properties Shear Test Dynamic Back Pressure Shearbox (DYNBPS)
    产品中心
    Dynamic Back Pressure Shearbox (DYNBPS)

    Model：DYNBPS

    Use：The Dynamic Back Pressured Shearbox (DYNBPS) is used for static and dynamic direct shear testing on soil specimens with control of sample pore pressures.

    Standard：GBT 50123-2019

    DYNAMIC BACK PRESSURE SHEARBOX

    Product Code : DYNBPS

    The Dynamic Back Pressured Shearbox (DYNBPS) is used for static and dynamic direct shear testing on soil specimens with control of sample pore pressures. The control of pore pressure during direct shear testing allows real-world situations to be modelled in the laboratory.

    This dynamic version of the device allows a landslide to be modelled as it quickly gains velocity after the initial moment of failure. Cyclic direct shear testing is also possible while still controlling and measuring pore pressure.
     

    Key features Benefits to the user
    Electro-mechanical actuators: Designed for long life and highly accurate position control. Unlike pneumatic actuators this type of actuator is suitable for carrying out small strain testing, long term creep tests and dynamic tests up to 5Hz.
    Realistic modelling: The DYNBPS provides a realistic model of many real-world cyclic and seismic geotechnical problems, such as slope stability and earthquake loading.
    Interchangeable internal load cells: For increasing accuracy and resolution on soft soils.
    Closed-loop control: For shear force/displacement and normal force/displacement.
    Shear gap: Manually set-able from outside the pressure vessel whilst under pressure.
    Balanced rams: Allows cost effective static pressure controllers to be used for back pressure with minimal pressure fluctuations during dynamic tests.

    Axial Force Accuracy

    16bit (i.e. <0.4N for 10kN load cell, <1.5N for 40kN load cell)

    Computer Interface

    USB

    Dimensions

    1200mm (H) x 500mm (L) X 770mm (W),

    Load Range (kN)

    Normal force 25kN, Shear force 10kN

    Operating Frequency (Hz)

    5Hz

    Power

    240V or 110V 50/60Hz 1 ph

    Pressure Range (MPa)

    2MPa back pressure

    Resolution of Measurement and Control

    10MHZ

    Sample Sizes

    50mm square, 75mm square (custom sizes available on request). Sample height = 20mm.

    Weight Approx (kg)

    160


     

    Project Case
    Solution
    Download
    相关标签
    HJC黄金城




      HJC黄金城