HJC黄金城

EPC Products Civil Engineering Testing Instruments Geotechnical Testing Rock & Soil Testing Laboratory Soil Testing Soil Mechanical Properties Dynamic Triaxial Testing  Dynamic Triaxial Testing System (DYNTTS-10)
产品中心
Dynamic Triaxial Testing System (DYNTTS-10)

Model:DYNTTS MAXDYN

Use:The Advanced Dynamic Triaxial Testing System is a high-end, no compromise testing apparatus combining a triaxial cell with a dynamic actuator capable of applying load, deformation and stresses up to 10Hz.

Standard:ASTM D-3999, ASTM D-5311,GB/T50123-2019

DYNAMIC TRIAXIAL TESTING SYSTEM (DYNTTS-10)

Product Code : DYNTTS-10

 The Advanced Dynamic Triaxial Testing System is a high-end, no compromise testing apparatus combining a triaxial cell with a dynamic actuator capable of applying load, deformation and stresses up to 10Hz. The cell itself is screw-driven from an integral base unit housing the motor drive. Axial force and axial deformation are applied through the base of the cell.  The system can be combined with a dynamic cell pressure actuator such that cell pressures may also be applied dynamically up to fundamental frequency of the machine (i.e. 2Hz, 5Hz or 10Hz).
 

Key features Benefits to the user
High accuracy electro-mechanical control: The DYNTTS system is capable of very small strain static tests through to large strain dynamic tests.
Interchangeable load cells: Allows user to accommodate very soft to very stiff soils with ranges of 1, 2, 4, 8, 10, 16, 25, 40 and 60kN.
In-built balanced ram (up to 5Hz systems): Keeps cell pressure constant during cycling, meaning a dynamic pressure controller is not required (unless dynamic cycling of cell pressure is required).
Interchangeable pedestals and triaxial extension top caps: Allows testing of 38, 50, 70 and 100mm diameter test specimens in the same cell.
Direct closed loop of axial displacement & axial force: Accurate control in either axial displacement or axial force mode.


Actuators

High accuracy electromechanical

Axial Force Accuracy

<0.1%

Axial Force Accuracy

16bit (i.e. <0.4N for 10kN load cell, <1.5N for 40kN load cell)

Axial Load

10kN, 20kN, 25kN, 40kN or 60kN

Computer Interface

USB

Displacement Range

100mm

Displacement Resolution

0.20um

Operating Frequency (Hz)

See pressure ranges

Pressure Range (MPa)

2Hz - 10kN to 60kN - 2MPa, 5Hz - 10kN to 60kN - 2MPa, 10Hz - 10kN to 20kN - 1400kPa, (2 & 5Hz can be upgradeable to 5MPa)

Resolution of Measurement and Control

10kHz control cycle

Sample Sizes

up to 300mm


Project Case
Solution
Download
相关标签
GDS Instruments,GDS
HJC黄金城





    HJC黄金城