HJC黄金城

EPC Products Environmental Testing Wood Testing Pulling Test
产品中心
Pulling Test

Model:Pulling Test

Use:At present, the most accepted method for evalsuating the safety and stability of tree roots

Standard:

Related Products



-       At present, the most accepted method for evalsuating the safety and stability of tree roots

-       Applying a bending load on the trunk via a cable attached to the tree

-       Assess the uprooting stability of the tree

-       Or to establish the risk of trunk breakage.

Make sure you follow all the safety instructions throughout the test!

  1. Attach the cable to the trunk in the crown of the tree, as high as possible.
  2. Choose an anchor point in the appropriate direction, about 10 to 15 m from the tree.
  3. Set up the winch and ropes according to the guide.
  4. Install the load cell.
  5. Install the inclinometer sensors.
  6. Install the extensiometer sensors.
  7. Connect all sensors to the central unit.
  8. Switch on the units, and press “Tara” on the load cell.
  9. Start the Pulling Test software.
  10. Start measurement by loading the cable slowly and evenly using the winch.



Project Case
Solution
Download
相关标签
HJC黄金城





    HJC黄金城