HJC黄金城

EPC Products Civil Engineering Testing Instruments Geotechnical Testing Quality Assurance Steel and Rebars Testing A1221 ANCHOR ultrasonic low-frequency tester
产品中心
A1221 ANCHOR ultrasonic low-frequency tester

Model：A1221 Anchor

Use：An ultrasonic low-frequency tester for in-situ quality assessment of concrete anchors, solid rebars and reinforcement.

Standard：JGJ114-2004；JGJ110-2008 ；GB50550-2010；JGJ126-2015

Related Products

An ultrasonic low-frequency tester for in-situ quality assessment of concrete anchors, solid rebars and reinforcement.


The main application field of A1221 ANCHOR is the non-destructive testing of anchor bolts and similar structural elements.

Following evalsuations can be performed by placing ultrasonic transducer on the free outer end of the bolt:

·         Detection of anchor breaks

·         Residual length/fraction assessment

·         Adhesion quality assessment

Application features:

Assessable bolt / rebar diameter

20-40 millimeters (0.8-1,6 inch)

Not grouted assessment length

up to 8 meters (26.3 feet)

Minimal assessment length

0.3 meter (9.8 feet)

Assessable grouting depth in concrete:

up to 1 meter (3.3 feet)

Assessable grouting depth in rock:

up to 4 meters (13.1 feet)

Project Case
Solution
Download
相关标签
HJC黄金城




    HJC黄金城